DA94-09287H Samsung OEM Refrigerator Main Control Board Replacement

What Is the DA94-09287H Samsung Refrigerator Main Control Board Replacement?

The DA94-09287H is the main control board for Samsung Bespoke 4-Door Flex and French Door refrigerators, housed in a control box at the back of the cabinet near the compressor compartment. It's the replacement control board that manages compressor cycling, defrost timing, fan operation, and overall temperature regulation for the unit. FailSafe Certified and backed by a 1-year warranty from Appliance Pro USA.

What Does the DA94-09287H Fix on a Samsung Refrigerator?

If your refrigerator is showing any of the following problems, a failing control board is a likely cause:

• Refrigerator not cooling at all
• Erratic or incorrect temperature readings
• Control panel unresponsive or frozen
• Unit will not power on
• Error code displayed on front panel
• Compressor or fans not cycling correctly

These symptoms point to the refrigerator control board as the most likely cause - but appliances are complex systems, and the same symptoms can occasionally stem from a sensor, switch, wiring harness, or motor issue. If a technician has identified the control board, or you've ruled out those components yourself, this board is your fix. When in doubt, contact us before you order - we're happy to walk you through some troubleshooting, and a photo of your board is usually all we need. A diagnosis from a local appliance technician works too.

How Do I Know If This Is the Right Board for My Refrigerator?

Before ordering, pull the rear lower access panel or machine-compartment cover and check the sticker on your existing board. If it reads DA94-09287H, DA92-01763A, or ASM32413, you've got a match - these numbers all identify the same control board used across this model lineup. Your Samsung refrigerator part number is on the sticker on the original board - look for the DA41-, DA92-, or DA94- prefix. On the board's sticker this number is printed without the dash, as DA9409287H, sometimes with a two-character lot code in front of it - it is the same part number.

Other part numbers used for this board: ASM32413. Retailers and parts catalogs list the same board under these numbers.

Not sure? Send us a photo of your board and its sticker before you order and we'll verify it for free - same business day.

Compatible Refrigerator Models

This control board is used across a range of Samsung Bespoke refrigerator models, including:

Additional Samsung models may also use this board - send us your model number and we will confirm it.

Reported fit is general reference material - confirm by the part number on your board's sticker before ordering.

This model list is for reference only. Samsung may change boards between production runs, so two appliances with the same model number can use different boards. Always order by the part number printed on your original board - it is the only identifier that decides.

Genuine OEM - FailSafe Certified™ Reconditioned

Every DA94-09287H board from Appliance Pro USA is a genuine OEM Samsung board restored to reliable working condition through the FailSafe Precision Protocol™, our 4-step recertification process built around what actually fails on this board:

• Failure Pattern Analysis - We've mapped the failure signatures specific to this board, identifying which components degrade and fail over time.
• Targeted Component Replacement - The components this board is known to lose are replaced before they get the chance to fail.
• Proactive Rebuild Standard - Known high-failure components are replaced with new parts on every board, regardless of whether they show a problem yet. Degraded parts don't ship.
• Final Certification - Every board is tested and certified to our internal FailSafe Precision Protocol standard for function and lifespan before it ships.

Key Features

• Genuine OEM Samsung main control board - not an aftermarket copy
• EEPROM-based PCB assembly that governs compressor, defrost, and fan operation
• Direct fit replacement for the original factory board in supported models
• Minor cosmetic wear may be present due to prior installation - it does not affect performance

Board Type and Function

This board acts as the brain of the refrigerator, reading input from sensors and sending commands to the compressor, evaporator fan, and condenser fan. It handles the defrost cycle timing so frost doesn't build up on the evaporator coils, and it regulates temperature in both the fresh food and freezer sections. When this board fails, the refrigerator can lose the ability to cool properly, display error codes, or stop responding to the control panel entirely. Because it coordinates nearly every cooling function, a bad board often mimics symptoms of a failed compressor or sensor.

Common Samsung Refrigerator Error Codes

If your Samsung refrigerator is displaying an error code, the table below describes what it typically indicates. Codes marked ★ are most directly associated with main control board failure. These are general Samsung codes and can vary by your exact model. Always confirm the exact meaning in your model's owner's manual or service guide before ordering any part.

Error code definitions vary by Samsung model series. Always confirm the exact meaning in your refrigerator's owner's manual or service guide before purchasing any part.

★ = Most directly associated with main control board failure

How to Install a Samsung Refrigerator Main Control Board

Start by unplugging the refrigerator completely before you touch anything. Remove the rear lower access panel or machine-compartment cover to expose the control box, and take a photo of the wire harness connections before pulling any of them loose - several of the low-voltage connectors are keyed but easy to mix up if you're working from memory. Ground yourself or use an anti-static wrist strap before handling the new board, since the EEPROM components are sensitive to static discharge. Swap the old board for the new one, reconnect each harness in its original position, and button the panel back up. Most people finish this install in under 30 minutes with basic hand tools. Once it's back together, give the unit a few hours to stabilize before you judge whether the repair worked - cooling takes time to catch up.

Shipping

Every board is physically in stock - no backorders, no drop shipping. Orders placed before 4:00 PM EST ship the same business day. Tracking provided on every order.

Warranty

Backed by a 1-year warranty from Appliance Pro USA (registration required - the card is in the box). If the board fails due to a defect within the warranty period, we'll repair or replace it at no charge (shipping fees may apply). Warranty coverage is determined at Appliance Pro USA's discretion. Boards that have been tampered with, or with the verification seal (hologram or tamper-evident sticker) removed or damaged, are not eligible for warranty coverage. Damage caused by improper installation, electrical surges, or physical damage is not covered.

Returns

Returns are accepted within 30 days of delivery. Boards that are unopened and uninstalled, in original condition with the verification seal (hologram or tamper-evident sticker) intact, qualify for a full refund. If the board has been opened or installed, contact us before sending it back with a photo of the board you received, the reason for the return, and a photo of your original board's part-number label so we can verify fitment and approve the return. Boards returned used, altered, damaged, or with the verification seal missing may receive a partial refund in line with our return policy. Exchanges for the correct part are always available.

Not sure it's the board? Before you order, and before you return, contact us. We offer free troubleshooting help and can usually tell from a photo of your board and its symptoms whether this is the right part. Only a technician can fully diagnose your appliance.