DA92-01199W Samsung OEM Refrigerator Main Control Board Replacement

What Is the DA92-01199W Samsung Refrigerator Main Control Board Replacement?

The DA92-01199W is the main control board for this Samsung French door refrigerator, housed inside a plastic control-board enclosure in the fresh food compartment, separate from the user display panel. It's the brain of the unit, coordinating the compressor, fans, defrost cycle, and sensors to keep both compartments at the right temperature. This replacement control board is FailSafe Certified and backed by a 1-year warranty from Appliance Pro USA.

DA92-01199W is the Samsung number printed on the board itself. If your paperwork or a parts lookup turned up PD00090700, ASM31891, or OEM28088470 instead, those all point to this same board.

What Does the DA92-01199W Fix on a Samsung Refrigerator?

This board is the usual suspect when a Samsung French door fridge starts showing any of these problems:

• Refrigerator not cooling or cooling only part of the time
• No power at all - the unit is completely dead
• Display panel blank or not responding to touch
• Compressor won't start or cycles on and off erratically
• Ice maker or water dispenser stopped working
• Fridge and freezer temperatures swinging out of range

These symptoms point to the refrigerator control board as the most likely cause - but appliances are complex systems, and the same symptoms can occasionally stem from a sensor, switch, wiring harness, or motor issue. If a technician has identified the control board, or you've ruled out those components yourself, this board is your fix. When in doubt, contact us before you order - we're happy to walk you through some troubleshooting, and a photo of your board is usually all we need. A diagnosis from a local appliance technician works too.

How Do I Know If This Is the Right Board for My Refrigerator?

Before you order, pull the control board cover inside the fresh food section and check the sticker on the board itself - that's what confirms the match, not the fridge's model number. If that sticker reads DA92-01199W, or you've seen it cross-referenced as PD00090700, ASM31891, or OEM28088470, you've got the right board. Your Samsung refrigerator part number is on the sticker on the original board - look for the DA41-, DA92-, or DA94- prefix. On the board's sticker this number is printed without the dash, as DA9201199W, sometimes with a two-character lot code in front of it - it is the same part number.

Other part numbers used for this board: PD00090700, ASM31891, OEM28088470. Retailers and parts catalogs list the same board under these numbers.

Not sure? Send us a photo of your board and its sticker before you order and we'll verify it for free - same business day.

Compatible Refrigerator Models

This board is confirmed for the following Samsung French door refrigerator models:

Additional Samsung models may also use this board - send us your model number and we will confirm it.

Reported fit is general reference material - confirm by the part number on your board's sticker before ordering.

This model list is for reference only. Samsung may change boards between production runs, so two appliances with the same model number can use different boards. Always order by the part number printed on your original board - it is the only identifier that decides.

Genuine OEM - FailSafe Certified™ Reconditioned

Every DA92-01199W board from Appliance Pro USA is a genuine OEM Samsung board restored to reliable working condition through the FailSafe Precision Protocol™, our 4-step recertification process built around what actually fails on this board:

• Failure Pattern Analysis - We've mapped the failure signatures specific to this board, identifying which components degrade and fail over time.
• Targeted Component Replacement - The components this board is known to lose are replaced before they get the chance to fail.
• Proactive Rebuild Standard - Known high-failure components are replaced with new parts on every board, regardless of whether they show a problem yet. Degraded parts don't ship.
• Final Certification - Every board is tested and certified to our internal FailSafe Precision Protocol standard for function and lifespan before it ships.

Key Features

• Genuine OEM Samsung main control board - not an aftermarket copy
• Controls compressor, fan, defrost, and temperature functions for consistent cooling
• Tested to confirm proper operation before it ships
• Minor cosmetic wear may be present due to prior installation - it does not affect performance

Board Type and Function

This board runs the core cooling logic for the refrigerator. It reads the temperature sensors in both compartments and decides when to run the compressor and fans to keep food cold. It also manages the defrost cycle so the evaporator coils don't ice over, and it handles the ice maker and dispenser functions. When this board fails, the whole cooling system loses its coordination, which is why symptoms show up across compressor, fans, and temperature all at once.

Common Samsung Refrigerator Error Codes

If your Samsung refrigerator is displaying an error code, the table below describes what it typically indicates. Codes marked ★ are most directly associated with main control board failure. These are general Samsung codes and can vary by your exact model. Always confirm the exact meaning in your model's owner's manual or service guide before ordering any part.

Error code definitions vary by Samsung model series. Always confirm the exact meaning in your refrigerator's owner's manual or service guide before purchasing any part.

★ = Most directly associated with main control board failure

How to Install a Samsung Refrigerator Main Control Board

Start by unplugging the refrigerator and shutting off the water supply line. Remove the interior control board cover - usually just a few screws - to get access to the board. Before you unplug anything, take a photo of the wiring and label the connectors, since several of them look alike and mixing them up will cause problems later. Touch bare metal or use a wrist strap to discharge static before handling the new board, then reconnect each harness in its original spot and reinstall the cover. Most people get through this job in under 30 minutes with basic hand tools. Once it's back together and powered up, give the refrigerator a few hours to settle into temperature before you judge whether the repair worked.

Shipping

Every board is physically in stock - no backorders, no drop shipping. Orders placed before 4:00 PM EST ship the same business day. Tracking provided on every order.

Warranty

Backed by a 1-year warranty from Appliance Pro USA (registration required - the card is in the box). If the board fails due to a defect within the warranty period, we'll repair or replace it at no charge (shipping fees may apply). Warranty coverage is determined at Appliance Pro USA's discretion. Boards that have been tampered with, or with the verification seal (hologram or tamper-evident sticker) removed or damaged, are not eligible for warranty coverage. Damage caused by improper installation, electrical surges, or physical damage is not covered.

Returns

Returns are accepted within 30 days of delivery. Boards that are unopened and uninstalled, in original condition with the verification seal (hologram or tamper-evident sticker) intact, qualify for a full refund. If the board has been opened or installed, contact us before sending it back with a photo of the board you received, the reason for the return, and a photo of your original board's part-number label so we can verify fitment and approve the return. Boards returned used, altered, damaged, or with the verification seal missing may receive a partial refund in line with our return policy. Exchanges for the correct part are always available.

Not sure it's the board? Before you order, and before you return, contact us. We offer free troubleshooting help and can usually tell from a photo of your board and its symptoms whether this is the right part. Only a technician can fully diagnose your appliance.