What Is the 200D4850G022 GE Refrigerator Main Control Board Replacement?
The 200D4850G022 is the main control board used in GE side-by-side refrigerators, mounted inside an enclosed control box behind the rear access cover or lower front grille depending on the model. As a replacement control board, it manages compressor cycling, defrost timing, and temperature regulation while coordinating the fans and, on some models, the dispenser. FailSafe Certified and backed by a 1-year warranty from Appliance Pro USA.
200D4850G022 is the number GE stamped on the board at the factory, and the current service replacement for it is WR55X10942, later updated to WR55X10942C - both are the same board. If your old board carries any of these numbers, or one of the other production numbers GE consolidated into this design, this is the correct replacement.
What Does the 200D4850G022 Fix on a GE Refrigerator?
This board is typically the cause when you see any of the following:
- Refrigerator or freezer section not cooling
- Refrigerator has no power at all - nothing runs
- Compressor won't start, clicking noise coming from the control area
- Control panel lights flashing or acting erratic
- Ice maker or water dispenser stopped working
- Interior lights not turning on
These symptoms point to the refrigerator control board as the most likely cause - but appliances are complex systems, and the same symptoms can occasionally stem from a sensor, switch, wiring harness, or motor issue. If a technician has identified the control board, or you've ruled out those components yourself, this board is your fix. When in doubt, contact us before you order - we're happy to walk you through some troubleshooting, and a photo of your board is usually all we need. A diagnosis from a local appliance technician works too.
How Do I Know If This Is the Right Board for My Refrigerator?
The board's sticker is on the face or back of the assembly and lists the production number alongside the service number - look for 200D4850G022 or WR55X10942 (also seen as WR55X10942C). Match what's printed on your original board rather than relying on the refrigerator's model number alone, since GE used this same board across many models under several different printed numbers. This board is also sold under WR55X10942, WR55X10942CT, WR49X10060, WR55X10065, WR55X10160, WR55X10177, WR55X10187, WR55X10228 - any of those numbers on your sticker means this is your board. Your GE refrigerator part number is on the sticker on the original board - look for the WR55-, 200D-, or WR49- prefix. GE lists WR55X10942C as its current replacement for this board - still match the number printed on your original board.
Other part numbers used for this board: WR55X10942P, AP7188100, PS16729744, EAP16729744, WR55X10294, WR55X10297, WR55X10314, WR55X10328, WR55X10333, WR55X10335, WR55X10336, WR55X10339, WR55X10358, WR55X10366, WR55X10372, WR55X10379, WR55X10381, WR55X10385, WR55X10396, WR55X10413, WR55X10416, WR55X10426, WR55X10427, WR55X10432, WR55X10436, WR55X10456, WR55X10473, WR55X10474, WR55X10523, WR55X10524, WR55X10526, WR55X10529, WR55X10543, WR55X10552, WR55X10554, WR55X10558, WR55X10589, WR55X10597, WR55X10603, WR55X10606, WR55X10614, WR55X10616, WR55X10626, WR55X10656, WR55X10659, WR55X10699, WR55X10712, WR55X10715, WR55X10722, WR55X11036, AP4436216, PS2364946. Retailers and parts catalogs list the same board under these numbers.
Not sure? Send us a photo of your board and its sticker before you order and we'll verify it for free - same business day.
Compatible Refrigerator Models
This board is used across a wide range of GE refrigerator models, including:
Confirmed GE models
- 39631UGTAWW
- 39631UGXAWW
- 39639USTAGV
- 39639USXAGV
- A4425GDTABB
- A4425GDTAWW
- A4425GDTBBB
- A4425GDTBWW
- BSS25GFPAWW
- BSS25GFPCCC
- BSS25GFPCWW
- BSS25GFPDCC
- BSS25GFPDWW
- BSS25GFPECC
- BSS25GFPEWW
- BSS25GFPHCC
- BSS25GFPHWW
- BSS25JFRFWW
- BSS25JFRJWW
- BSS25JFTBWW
- BSS25JFTCWW
- BSS25JFTDWW
- BSS25JFTEWW
- BSS25JFTGWW
- BSS25JFTHWW
- BSS25JFTIWW
- BSS25JFTJWW
- BSS25JFTNWW
- GDS22KCWAWW
- GDS22KCWBWW
- PDS22MFSABB
- PDS22MFSACC
- PDS22MFSAWW
- GSS20IEMDCC
- ESH25XGRACC
- PSI23NCNABB
Additional GE models may also use this board - send us your model number and we will confirm it.
Also reported to fit - verify by the label on your board
- BSS25GFPACC
- BSS25JFTAWW
- BSS25JSRFSS
- BSY25GFMDCC
- GSS25UFMABB
- GSH25JSRFSS
- GZS23HGECFBB
- HST25IFPHCC
Reported fit is general reference material - confirm by the part number on your board's sticker before ordering.
This model list is for reference only. GE may change boards between production runs, so two appliances with the same model number can use different boards. Always order by the part number printed on your original board - it is the only identifier that decides.
Genuine OEM - FailSafe Certified Reconditioned
Every 200D4850G022 board from Appliance Pro USA is a genuine OEM GE board restored to reliable working condition through the FailSafe Precision Protocol, our 4-step recertification process built around what actually fails on this board:
-
Failure Pattern Analysis - We've mapped the failure signatures specific to this board, identifying which components degrade and fail over time.
-
Targeted Component Replacement - The components this board is known to lose are replaced before they get the chance to fail.
-
Proactive Rebuild Standard - Known high-failure components are replaced with new parts on every board, regardless of whether they show a problem yet. Degraded parts don't ship.
-
Final Certification - Every board is tested and certified to our internal FailSafe Precision Protocol standard for function and lifespan before it ships.
Key Features
- Genuine OEM GE main control board - not an aftermarket copy
- FailSafe Certified for reliable operation
- Backed by a 1-year warranty from Appliance Pro USA
- Minor cosmetic wear may be present due to prior installation - it does not affect performance
Board Type and Function
The main control board is the brain of the refrigerator's cooling system. It reads input from the thermistors and cycles the compressor relay on and off to hold the set temperature in both the fresh food and freezer sections. It also runs the defrost heater on a timed schedule to keep the evaporator coil clear of frost, and it coordinates the fan motors along with the door and dispenser switches. When this board fails, the whole cooling system loses its coordination, not just one component.
Common GE Refrigerator Error Codes
If your GE refrigerator is displaying an error code, the list below describes what it typically indicates. These are general GE codes and can vary by your exact model, so use this as a general guide. Codes labeled Board Related are the ones most directly associated with main control board failure. Always confirm the exact meaning in your model's owner's manual or service guide before ordering any part.
-
HRS - Board Related - Main control board failure - system crashed or stuck in defrost. Most severe GE error
-
CC - Board Related - Cooling / compressor circuit fault - board cannot communicate with compressor
-
EC / E0 - Board Related - Communication error between main control board and user interface
-
E4 / Er - Board Related - Defrost system error or temperature sensor fault - board-controlled cycle
-
FF - Freezer fan failure or freezer temperature too high for 2+ hours
-
dE / DF - Defrost system not operating properly in last 24 hours (dE) or no defrost circuit current in 48 hours (DF)
-
E2 / E3 - Evaporator fan (E2) or condenser fan (E3) communication error
-
CI - Ice maker fault - check for jammed ice, water supply, or ice maker assembly issue
-
PF - Power failure detected - press System Check button to clear. Not a board fault
-
tC / tF - Turbo Cool / Turbo Freeze active - normal function modes, not error codes
This list is general reference material. Error code definitions vary by GE (Profile, Cafe, standard) model series. Always confirm the exact meaning in your refrigerator's owner's manual or service guide before purchasing any part.
How to Install a GE Refrigerator Main Control Board
Start by unplugging the refrigerator - this board carries line voltage and you don't want it live while you're working on it. Pull the unit out, then remove the screws holding the rear access cover or the lower front grille, whichever applies to your model. Before disconnecting anything, take a photo of the wiring harness so you know exactly where each connector goes back. Label the connectors as you pull them, handle the new board by its edges to avoid static damage, and plug everything back into the same spots. Most people finish this in under 30 minutes with basic hand tools. Once it's back together and running, give the refrigerator a few hours to reach temperature before you decide whether the repair worked.
Shipping
Every board is physically in stock - no backorders, no drop shipping. Orders placed before 4:00 PM EST ship the same business day. Tracking provided on every order.
Warranty
Backed by a 1-year warranty from Appliance Pro USA (registration required - the card is in the box). If the board fails due to a defect within the warranty period, we'll repair or replace it at no charge (shipping fees may apply). Warranty coverage is determined at Appliance Pro USA's discretion. Boards that have been tampered with, or with the verification seal (hologram or tamper-evident sticker) removed or damaged, are not eligible for warranty coverage. Damage caused by improper installation, electrical surges, or physical damage is not covered.
Returns
Returns are accepted within 30 days of delivery. Boards that are unopened and uninstalled, in original condition with the verification seal (hologram or tamper-evident sticker) intact, qualify for a full refund. If the board has been opened or installed, contact us before sending it back with a photo of the board you received, the reason for the return, and a photo of your original board's part-number label so we can verify fitment and approve the return. Boards returned used, altered, damaged, or with the verification seal missing may receive a partial refund in line with our return policy. Exchanges for the correct part are always available.
Not sure it's the board? Before you order, and before you return, contact us. We offer free troubleshooting help and can usually tell from a photo of your board and its symptoms whether this is the right part. Only a technician can fully diagnose your appliance.
