What Is the DA92-01752G Samsung Refrigerator Main Control Board Replacement?
The DA92-01752G is a genuine main control board built for Samsung refrigerators. It acts as the replacement control board for units where the original has failed, managing compressor cycling, defrost timing, and temperature regulation while communicating with the display and user interface. FailSafe Certified and backed by a 1-year warranty from Appliance Pro USA.
What Does the DA92-01752G Fix on a Samsung Refrigerator?
A failing main control board usually shows up as one or more of the following:
- Refrigerator or freezer not cooling properly
- Compressor won't turn on or runs constantly
- Defrost cycle not starting or completing
- Display panel is blank, frozen, or unresponsive
- Temperature settings won't hold or adjust
- Refrigerator loses power or resets on its own
These symptoms point to the refrigerator control board as the most likely cause - but appliances are complex systems, and the same symptoms can occasionally stem from a sensor, switch, wiring harness, or motor issue. If a technician has identified the control board, or you've ruled out those components yourself, this board is your fix. When in doubt, contact us before you order - we're happy to walk you through some troubleshooting, and a photo of your board is usually all we need. A diagnosis from a local appliance technician works too.
How Do I Know If This Is the Right Board for My Refrigerator?
Before ordering, check the sticker on your existing control board rather than relying on your refrigerator's model number alone - boards get swapped across model lines. If the number printed on that sticker reads DA92-01752G, this is the correct replacement board for your unit. Your Samsung refrigerator part number is on the sticker on the original board - look for the DA41-, DA92-, or DA94- prefix.
Not sure? Send us a photo of your board and its sticker before you order and we'll verify it for free - same business day.
Compatible Refrigerator Models
This board is ordered by part number, not by appliance model. Send us your full model number and a photo of your board's sticker and we will confirm fitment before you buy - same business day.
This model list is for reference only. Samsung may change boards between production runs, so two appliances with the same model number can use different boards. Always order by the part number printed on your original board - it is the only identifier that decides.
Genuine OEM - FailSafe Certified Reconditioned
Every DA92-01752G board from Appliance Pro USA is a genuine OEM Samsung board restored to reliable working condition through the FailSafe Precision Protocol, our 4-step recertification process built around what actually fails on this board:
-
Failure Pattern Analysis - We've mapped the failure signatures specific to this board, identifying which components degrade and fail over time.
-
Targeted Component Replacement - The components this board is known to lose are replaced before they get the chance to fail.
-
Proactive Rebuild Standard - Known high-failure components are replaced with new parts on every board, regardless of whether they show a problem yet. Degraded parts don't ship.
-
Final Certification - Every board is tested and certified to our internal FailSafe Precision Protocol standard for function and lifespan before it ships.
Key Features
- Genuine OEM Samsung main control board - not an aftermarket copy
- Tested for proper fit and function before it ships
- FailSafe Certified and backed by a 1-year warranty from Appliance Pro USA
- Minor cosmetic wear may be present due to prior installation - it does not affect performance
Board Type and Function
This board is the main control center for the refrigerator's cooling system. It regulates when the compressor runs, controls the defrost cycle timing, and manages temperature settings for both the fresh food and freezer compartments. It also handles communication with the display or user interface board, so a fault here can affect cooling performance and the readout at the same time.
Common Samsung Refrigerator Error Codes
If your Samsung refrigerator is displaying an error code, the list below describes what it typically indicates. These are general Samsung codes and can vary by your exact model, so use this as a general guide. Codes labeled Board Related are the ones most directly associated with main control board failure. Always confirm the exact meaning in your model's owner's manual or service guide before ordering any part.
-
41E / 41C / PC ER - Board Related - Communication failure between main control board and display panel
-
88 88 - Board Related - Control board communication loss, not demo mode. Reset first; if it returns, board diagnosis needed
-
83E - Board Related - Compressor abnormal current, a board-managed compressor circuit fault
-
85E / 85C - Board Related - Low voltage error detected by main control board
-
84C / 84E - Compressor rotor locked, the most severe Samsung error. Requires immediate professional service
-
1E / SE - Freezer temperature sensor failure
-
2E - Fresh food compartment temperature sensor failure
-
4E - Freezer defrost sensor failure
-
5E - Defrost function error or defrost sensor failure
-
8E - Ice maker sensor failure
-
21E - Freezer evaporator fan not running
-
22E - Fresh food evaporator fan not running
-
23E - Condenser fan failure
-
OF OF - Demo mode active, cooling fully disabled. Not an error code
This list is general reference material. Error code definitions vary by Samsung model series. Always confirm the exact meaning in your refrigerator's owner's manual or service guide before purchasing any part.
How to Install a Samsung Refrigerator Main Control Board
Most people finish this install in under 30 minutes with basic hand tools. Unplug the refrigerator before starting any work and locate the existing control board. Take a photo of the wiring harness connections before you disconnect anything - it makes reconnecting the new board straightforward. Swap in the DA92-01752G, reconnect each wire to match your photo, and secure the board back in place. Plug the refrigerator back in and give it a few hours to stabilize before judging whether the repair fixed the problem.
Shipping
Every board is physically in stock - no backorders, no drop shipping. Orders placed before 4:00 PM EST ship the same business day. Tracking provided on every order.
Warranty
Backed by a 1-year warranty from Appliance Pro USA (registration required - the card is in the box). If the board fails due to a defect within the warranty period, we'll repair or replace it at no charge (shipping fees may apply). Warranty coverage is determined at Appliance Pro USA's discretion. Boards that have been tampered with, or with the verification seal (hologram or tamper-evident sticker) removed or damaged, are not eligible for warranty coverage. Damage caused by improper installation, electrical surges, or physical damage is not covered.
Returns
Returns are accepted within 30 days of delivery. Boards that are unopened and uninstalled, in original condition with the verification seal (hologram or tamper-evident sticker) intact, qualify for a full refund. If the board has been opened or installed, contact us before sending it back with a photo of the board you received, the reason for the return, and a photo of your original board's part-number label so we can verify fitment and approve the return. Boards returned used, altered, damaged, or with the verification seal missing may receive a partial refund in line with our return policy. Exchanges for the correct part are always available.
Not sure it's the board? Before you order, and before you return, contact us. We offer free troubleshooting help and can usually tell from a photo of your board and its symptoms whether this is the right part. Only a technician can fully diagnose your appliance.
